Use of 3D Fluoroscopy to Assist in the Reduction and Fixation of Pelvic and Acetabular Fractures: A Safety and Quality Case Series.

SUMMARY: Multidimensional fluoroscopy has been increasingly used in orthopaedic trauma to improve the intraoperative assessment of articular reductions and implant placement. Owing to the complex osteology of the pelvis, cross-sectional imaging is imperative for accurate evaluation of pelvic ring and acetabular injuries both preoperatively and intraoperatively. The continued development of fluoroscopic technology over the past decade has resulted in improved ease of intraoperative multidimensional fluoroscopy use in pelvic and acetabular surgery. This has provided orthopaedic trauma surgeons with a valuable tool to better evaluate reduction and fixation at different stages during operative treatment of these injuries. Specifically, intraoperative 3D fluoroscopy during treatment of acetabulum and pelvis injuries assists with guiding intraoperative decisions, assessing reductions, ensuring implant safety, and confirming appropriate fixation. We outline the useful aspects of this technology during pelvic and acetabular surgery and report its utility with a consecutive case series at a single institution. The added benefits of this technology have improved the ability to effectively manage patients with pelvis and acetabulum injuries.

Iliosacral Screws Can be Placed With Precision by Adjusting the Pelvic Inlet Between S1 and S2.

OBJECTIVES: To determine: 1) the natural incidence of sacral inlet angle differences between S1 and S2 and 2) implications for iliosacral screw placement with a technique to improve the accuracy of the intraoperative fluoroscopic inlet for S1 and S2. DESIGN: Combined retrospective and prospective cohort reviews. SETTING: Regional Level 1 trauma center. PATIENTS/PARTICIPANTS: After exclusion criteria, 300 patients with uninjured pelvic rings to determine the natural incidence of S1 - S2 angle differences and 33 patients treated with iliosacral screws over the study period. INTERVENTION: None in the retrospective cohort. In the prospective cohort all patients underwent fluoroscopically assisted iliosacral screw fixation. MAIN OUTCOME MEASUREMENTS: Radiographic determination of S1 - S2 angle differences above 10 degrees in a natural population for the retrospective cohort. In the prospective, operative cohort the outcome of interest was the safety of iliosacral screws in S1 and S2 as determined on intraoperative fluoroscopy and postoperative CT scan.Results: In the retrospective cohort, 180/300 (60.0%) had S1 - S2 inlet angle differences above 10 degrees. In the operative cohort, 19/33 (57.6%) had S1 - S2 inlet angle differences above 10 degrees. Of the iliosacral screws in S1 and S2 placed using the described imaging technique, all (69/69, 100%) were safe. CONCLUSIONS: A normal population determined that differences in the inlet angle between S1 and S2 are common. An operative cohort was treated using preoperative CT-based planning to define different intraoperative fluoroscopic inlet views for S1 and S2, if a larger difference existed. Using this technique, 69/69 (100%) of iliosacral screws were either intraosseous or juxtacortical and safe. LEVEL OF EVIDENCE: Level V. See Instructions for Authors for a complete description of levels of evidence.

Imaging of Pelvic and Acetabular Trauma: Part 2, Soft-Tissue Findings.

Pelvic ring injuries and acetabular fractures can be complex and challenging to treat. Orthopaedic trauma surgeons scrutinize pelvic radiographs and accompanying CT images for the osseous details that help create a thorough patient-specific preoperative plan. While the osseous details are incredibly important, the surrounding soft-tissue structures are equally as critical and can have a tremendous effect on both the patient and the surgeon. These findings may change surgery timing, dictate the need for additional surgeons or multidisciplinary teams, and determine the treatment sequence. The structures and potential clinical findings reviewed and demonstrated through example images should be sought out during physical examination and correlative preoperative imaging review. Combining all the available osseous and nonosseous information with a detailed approach helps the surgeon predict potential pitfalls and adjust surgical plans before incision. Maximizing the accuracy of the preoperative planning process can streamline treatment algorithm development and ultimately contribute to the best possible clinical patient outcome.

Imaging of Pelvic and Acetabular Trauma: Part 1, Osseous Findings.

Pelvic ring injuries and acetabular fractures are complex injuries and are often challenging to treat for a number of reasons. Orthopaedic trauma surgeons critically evaluate pelvic radiographs and CT images to generate an appropriate detailed injury and patient-specific preoperative plan. There are numerous crucial osseous details that surgeons should be aware of. Often, some of the most important factors that affect patients in treatment timing decisions, assessing reduction strategies, and deciding and inserting fixation constructs may be subtle on preoperative imaging. The radiographic and CT imaging findings covered subsequently should be sought out and appreciated preoperatively. Combining all the available osseous information helps the surgeon predict potential pitfalls and adjust surgical plans before incision. Ensuring a methodical and meticulous imaging review allows for the development of a detailed preoperative plan and helps avoid intraoperative missteps. This process will inherently streamline the surgical procedure and optimize the patient's surgical care. Maximizing the accuracy of the preoperative planning process can streamline the treatment algorithm and ultimately contribute to the best possible clinical outcome.

Posterior Exposure in Kocher-Langenbeck With Gluteus Minimus Debridement vs. the Gibson Approach: A Cadaveric Study.

OBJECTIVE: To quantify the posterior acetabular exposure achieved with the Kocher-Langenbeck (K-L) with gluteus minimus debridement and Gibson approaches. METHODS: A Kocher-Langenbeck approach and a subsequent Gibson approach on the contralateral hip were performed in the prone position on 9 fresh frozen cadavers. Calibrated digital images were obtained of the Kocher-Langenbeck exposure, Kocher-Langenbeck exposure after gluteus minimus debridement, and Gibson exposure. The surface area of the posterior hip and pelvis visualized with each approach was calculated and compared with the contralateral side to assess for the difference between exposures. RESULTS: In 5 of the 9 cadavers, the Kocher-Langenbeck exposure before gluteus minimus debridement yielded an increased exposure in comparison with the Gibson approach, and the exposure was equivocal in 3 specimens. An increase of greater than 10% was considered significant. The exposure increased anteriorly and cranially by an average of 13.1 cm 2 after debridement of the gluteus minimus caudal to the superior gluteal neurovascular bundle in the Kocher-Langenbeck approach. CONCLUSIONS: Debridement of the gluteus minimus caudal to the level of the superior gluteal neurovascular bundle can significantly increase anterior and cranial exposure in the Kocher-Langenbeck approach and provide similar areas of access when compared with that in the Gibson approach.

A New Algorithm for Classifying Acetabular Fracture Patterns on Three-dimensional Computed Tomography Reconstructions Markedly Improves Residents' Ability to Correctly Classify Fractures.

INTRODUCTION: CT and three-dimensional (3D) CT reconstructions have been shown to improve the understanding of acetabular fractures. With the increased availability of 3D pelvic CT reconstructions, our goal for this study was to develop an algorithm to aid residents in the classification of acetabular fractures. We hypothesized that the use of a stepwise algorithm will markedly enhance the trainees' ability to correctly identify acetabular fracture patterns. METHODS: This was a multicenter study that included 33 residents. Residents reviewed 15 sets of 3D reconstructions of the 10 acetabular fracture patterns. Residents completed the first round, and the results were collected electronically. Three weeks later, they were asked to classify the fractures a second time with the use of the algorithm. The number of correct responses from the two sessions was analyzed to determine if the algorithm improved residents' ability to correctly classify fracture patterns. RESULTS: Thirty-three residents classified 15 fractures which yielded 495 unique responses. Residents correctly classified 52.5% (260/495) of fractures without the algorithm, which significantly increased to 77.5% (384/495) (P = 0.001) with the algorithm. When stratified by year in residency, all residents were able to correctly classify markedly more fractures with the algorithm. DISCUSSION: Overall, we believe this method is a reproducible diagnostic tool that will assist residents in classifying acetabular fractures. We were able to demonstrate that with the use of this algorithm, residents' ability to correctly classify acetabular fractures is markedly enhanced, regardless of year in training. This algorithm will be a useful adjunct to assist and advance trainees' education and understanding of a complex topic.

Is retrograde nailing superior to lateral locked plating for complete articular distal femur fractures?

INTRODUCTION: Nonunion rates for distal femur fractures treated with lateral locked plating (LLP) remains as high as 18-22% despite significant advances with implant design and construct modulation. However, whether treatment of distal femur fractures with rIMN has improved outcomes compared to LLP has not been well characterized. The purpose of this study was to compare outcomes of complete articular distal femur fractures (AO/OTA 33-C) treated with either LLP or rIMN. METHODS: 106 distal femur fractures in 106 patients between January 2014 and January 2018 were identified. Medical records were reviewed to collect patient age, gender, body mass index, sagittal and coronal plane alignment on immediate postoperative radiographs, time to union, incidence of nonunion, and incidence of secondary operative procedures for repair of a nonunion. RESULTS: Of 106 patients, 50 underwent rIMN and 56 underwent LLP. The mean age at the time of injury was 51 years (21 to 86 years) and there were 55 males. Average coronal alignment of 83.7° of anatomic lateral distal femoral angle (aLDFA) and sagittal alignment of <1° of apex anterior angulation in the rIMN group. In the LLP group there was an average of 87.9° of aLDFA and 1.9° of apex anterior angulation (p = .005 and p = .36). Average time to union in the rIMN group was 6 months and 6.6 months in the LLP group (p = .52). Incidence of nonunion in the rIMN group was 11.8% and 27.5% in the LLP group (p = .008). There were 8 secondary procedures for nonunion in the rIMN group and 18 in the LLP group (p = .43). CONCLUSIONS: Our results demonstrated a higher nonunion rate and coronal plane malalignment with LLP compared to rIMN. While prospective data is required, rIMN does appear to be an appropriate treatment for complete articular distal femur fractures with a potentially decreased rate of nonunion .

Posterior Wall Acetabulum Fracture with a Persistent Sciatic Artery: A Case Report.

CASE: We report the case of a patient who sustained a left posterior wall acetabular fracture with an ipsilateral persistent sciatic artery (PSA). The PSA was diagnosed preoperatively on lower extremity computed tomography angiogram. He was treated with open reduction internal fixation through a Kocher-Langenbeck approach. The PSA and sciatic nerve were identified and protected throughout the case. There were no neurovascular complications. CONCLUSION: PSA in the setting of posterior wall acetabulum fractures has not been reported previously. Orthopaedic surgeons who treat these injuries should be aware of PSA anatomic variants so that they can be identified and protected during surgery.

Low Superior Pubic Ramus Screw Failure Rate With Combined Anterior and Posterior Pelvic Ring Fixation.

OBJECTIVES: To determine whether fracture pattern, implant size, fixation direction, or the amount of posterior pelvic ring fixation influences superior ramus medullary screw fixation failure. DESIGN: Retrospective cohort review. SETTING: Regional Level 1 trauma center. PATIENTS/PARTICIPANTS: After exclusion criteria, 95 patients with 111 superior ramus fractures with 3 months minimum follow-up were included. INTERVENTION: All patients underwent anterior and posterior pelvic ring fixation. MAIN OUTCOME MEASUREMENTS: Comparison of immediate postoperative radiographs and/or computer tomography scan with the latest postoperative image to calculate interval fracture displacement and implant position. Postoperative fracture displacement or implant position change greater than 1 cm were considered fixation failures. RESULTS: Five screws were defined as failures (4.5%), including 3 retrograde, 3 with bicortical fixation, 4 with a 4.5-mm screw, and 1 with a 7.0-mm screw. Fracture patterns included 2 oblique and 3 comminuted fractures. Based on the Nakatani classification, there were 3 zone II, 1 zone I, and 1 zone III. Failure modes included 3 with cut-out along the screw head and 1 cut-out and 1 cut-through at the screw tip. CONCLUSIONS: Our incidence of superior pubic ramus intramedullary screw fixation failure was 4.5%. Even with anterior and posterior fixation along with precise technique, failures still occur without a common failure predictor. The percutaneous advantages and proven strength provided by an intramedullary implant make it desirable to help reestablish global pelvic ring stability. Biomechanical and clinical studies are needed to further understand intramedullary superior ramus screw fixation. LEVEL OF EVIDENCE: Therapeutic Level IV. See Instructions for Authors for a complete description of levels of evidence.

Blunt End Wire and Lateral Sacral View: A Technical Trick to Precisely Terminate Percutaneous Pelvic Brim Screw Fixation in the Posterior Ilium.

SUMMARY: Percutaneous screw fixation in the treatment of a variety of pelvic fractures may involve placement of a pelvic brim or "LC-2" screw. The technique requires the use of the combined obturator oblique inlet view to define the medial and lateral cortical borders of the corridor and an iliac oblique view to define the cranial aspect of the sciatic notch. No technique has been reported on how to safely avoid placement of such percutaneous fixation beyond the posterior cortex of the ilium. A simple technique using the blunt end of a guidewire and a true lateral of the posterior ilium is reported.

Biomechanical Analysis of Retrograde Superior Ramus Screw Fixation Constructs.

OBJECTIVE: To investigate the biomechanical performance of different size and length retrograde superior ramus screws. MATERIALS AND METHODS: A vertical superior ramus fracture was created in osteoporotic composite hemipelvis bone models (Sawbones, Vashon Island, WA). After reduction, 4 fixation groups were created by inserting either a solid 4.5 mm (Depuy Synthes, Paoli, PA) or cannulated 7.0 mm screw (Zimmer, Warsaw, IN) of either 80 mm (short) or 140 mm (long) in length. An intact and an unstabilized osteotomy group were also created. Samples underwent cyclic loading for 5000 cycles with data acquisition at regular intervals. At the end of cyclic loading, load to failure was performed. RESULTS: The displacement after 5000 cycles for 4.5 mm short screws was significantly greater than 4.5 mm long and 7.0 mm short screws. At 5000 cycles, the 4.5-mm short screws had a significantly lower stiffness and lower load to failure than all other screws and were not different from the osteotomy model. CONCLUSIONS: Short 4.5-mm screws demonstrated increased displacement, lower stiffness, and decreased load to failure compared with all other screws. The biomechanical performance of 4.5-mm short screws was no different than unstabilized controls. Longer bicortical screw fixation is suggested when possible. Additional biomechanical and clinical studies are needed to fully understand the significance of these findings.

Effect of Intraoperative Multidimensional Fluoroscopy Versus Conventional Fluoroscopy on Syndesmotic Reduction.

BACKGROUND: Despite multiple techniques to improve syndesmotic reduction accuracy, syndesmotic malreduction in unstable ankle fractures remains prevalent. We performed a prospective, observational study to assess the ability of intraoperative multidimensional fluoroscopy to lead a surgeon to change the syndesmotic reduction obtained by conventional fluoroscopic techniques with the goal of achieving an accurate reduction. METHODS: Thirty patients with unilateral malleolar ankle fractures and syndesmotic instability were enrolled. Following fixation of the malleollar fractures, the syndesmosis was provisionally reduced. Once the surgeon believed acceptable reduction was obtained by comparison with the contralateral, uninjured ankle mortise and lateral fluoroscopic images, provisional fixation was used to maintain reduction. Intraoperative, multidimensional fluoroscopy was used to generate cross-sectional images to assess the reduction. The surgeon then decided if a change in the reduction was needed, and fixation proceeded per surgeon preference. Postoperative bilateral computed tomography (CT) scans of the ankles were used to assess the reduction. RESULTS: The main outcome recorded was syndesmotic reduction change by the attending surgeon following 3-dimensional (3D) fluoroscopic imaging. The secondary outcome was syndesmotic reduction accuracy on postoperative CT scan. Fourteen of 30 patients had intraoperative reduction change following 3D fluoroscopic imaging. Three of 30 patients had residual malreduction compared with the contralateral ankle on bilateral postoperative CT scan. CONCLUSION: Intraoperative 3D fluoroscopy frequently led the surgeon to change the syndesmotic reduction obtained by conventional techniques and provided additional information not available with 2-dimensional fluoroscopy. A 10% syndesmotic malreduction rate was obtained with this technique. LEVEL OF EVIDENCE: Diagnostic level II, prospective comparative study.

Morbid obesity and short-term complications following acetabular fracture surgery: A comparative cohort study.

INTRODUCTION: Obesity is an epidemic facing the United States affecting nearly 40% of the population (93.3 million adults). The objective of this study was to compare early perioperative complications in patients with a normal BMI to patients who are pre-obese, obese, and morbidly obese. MATERIALS AND METHODS: The study was conducted at a Level-I trauma center. Patients were separated into 4 groups based on their BMI. Group 1 had a BMI < 25 (normal), Group 2 had a BMI between 25-29.9 (pre-obesity), Group 3 had a BMI between 30-39.9 (obese), and Group 4 had a BMI ≥40 (morbidly obese). Outcome variables included total operative time (OT), estimated blood loss (EBL), length of stay (LOS), and early medical and surgical complications. A comparison between groups was performed for each outcome variable and surgical complication. RESULTS: We identified 333 patients and the number of patients in Groups 1-4 were 86, 96, 121, and 30, respectively. The average BMI for Groups 1-4 was 22.3, 27.3, 35.9, and 44.9, respectively (p < 0.001). OT, EBL, and LOS did not differ between groups or between the surgical approach utilized. There were no significant relationships when comparing complication rates between groups. Patients in Group 4 experienced significantly more PE compared to patients in Group 2 (p=0.01). Additionally, patients in Group 4 experienced a significantly more PE than patients in Groups 1 and 2 combined (p<.01). The relative risk of having a PE if BMI is ≥40, compared to a BMI <30 is 18.40 (95% CI = 1.98 - 171.13). The PEs were not fatal in all cases. CONCLUSIONS: In the treatment of the obese and morbidly obese with acetabular fractures, we find that these cohorts are not at a greater risk of wound complications or infection. The higher rate of pulmonary embolism seen in the morbidly obese should be considered when evaluating these patients for appropriate thromboembolic prophylaxis.

Clinical Results of Acetabular Fracture Fixation Using a Focal Kocher-Langenbeck Approach Without a Specialty Traction Table.

OBJECTIVES: To report the clinical result of a series of patients who underwent acetabular fracture fixation using a Kocher-Langenbeck approach without a specialty traction table. DESIGN: Retrospective case series. SETTING: Level 1 trauma center. PATIENTS/PARTICIPANTS: All patients who sustained posterior wall or posterior wall associated acetabular fractures that were treated operatively with a Kocher-Langenbeck approach over a 5-year period. INTERVENTION: Surgical fixation of acetabular fractures using a flat, radiolucent table. MAIN OUTCOME MEASUREMENTS: Outcomes included reduction quality and complications such as infection, heterotopic ossification, loss of reduction or fixation, medical complications, and neurologic injury. RESULTS: We identified 172 patients. No articular malreductions of greater than 2 mm were noted on postoperative CT scans. There were 13 surgical complications observed (8.1%). There was 1 death in our cohort (0.6%), and 3 patients had nonfatal pulmonary emboli (1.9%). There were no nerve injuries observed. There were 6 acute infections (3.1%) requiring surgical intervention. Three patients had symptomatic heterotopic bone that required excision (1.9%). Four patients (2.5%) required eventual total hip arthroplasty. CONCLUSION: Overall, we report on the largest cohort in the literature undergoing a prone Kocher-Langenbeck without a specialty table for acetabular fracture fixation. We found that limited extremity prepping and draping for a prone Kocher-Langenbeck on a flat, radiolucent table did not result in an increased rate of postoperative neurological complications or malreductions of acetabular fractures. LEVEL OF EVIDENCE: Therapeutic Level IV. See Instructions for Authors for a complete description of levels of evidence.

Cortical Impaction in Posterior Wall Acetabular Fractures.

OBJECTIVES: To report the incidence of patients with extra-articular posterosuperior acetabular cortical impaction associated with a posterior wall acetabular fracture-dislocation. DESIGN: Retrospective case series. SETTING: Regional Level 1 trauma center. PATIENTS/PARTICIPANTS: Ninety-seven patients who sustained an isolated posterior wall acetabular fracture-dislocation from July 2007 until July 2017. INTERVENTION: The medical record and the computed tomography (CT) scan of the abdomen and pelvis were reviewed including axial, coronal, and sagittal reconstruction images and 3D surface renderings. MAIN OUTCOME MEASUREMENTS: Each pelvic CT scan was evaluated for impaction of the extra-articular posterosuperior acetabular cortical surface associated with posterior wall acetabular fracture-dislocations. The reduction accuracy was assessed for each patient with cortical impaction using postoperative CT scans. The final attending radiology report was reviewed to see whether the cortical impaction was noted. RESULTS: Four of the 99 patients (4.12%) had identifiable areas of cortical impaction on preoperative CT imaging. Reduction accuracy demonstrated 1 anatomical reduction, 2 imperfect reductions, and 1 poor reduction. The final attending radiologist report did not comment on any patient with cortical impaction. CONCLUSIONS: Our study demonstrates that a small number of patients sustain cortical impaction of the posterosuperior acetabular cortical surface along with their posterior wall acetabular fracture-dislocation. Although uncommon, preoperative imaging should be scrutinized to identify this clinical entity. As part of the preoperative plan, the surgeon can anticipate the cortex available for reduction verification and whether any additional steps or altered surgical approaches are needed to achieve an anatomical reduction. LEVEL OF EVIDENCE: Prognostic Level IV. See Instructions for Authors for a complete description of levels of evidence.

Intramedullary Fixation Techniques for the Anterior Pelvic Ring.

The superior ramus is an irregularly shaped, undulating, and curvilinear osseous structure that can provide an osseous conduit for intramedullary screws. A wide spectrum of variability between the curve and obliquity of the superior ramus osseous fixation pathway (OFP) exists in both the anteroposterior and the coronal planes. A detailed understanding of the osseous topography and how it correlates with fluoroscopic imaging is mandatory. Obtaining the correct intraoperative inlet and combined obturator oblique-outlet fluoroscopic views specific to each patient's anatomy is necessary for safe implant insertion. Intramedullary screws can be inserted in either an antegrade or a retrograde direction depending on a number of variables, including fracture location, the proximity of patient's external genitalia to the skin insertion side, and the possible impact of thigh girth on the surgeons hand position. Multiple screw insertion techniques are possible, but a simple and reproducible technique is described. The size and number of screws that can be inserted is variable, differs between surgeons, but is ultimately dependent on the cortical limits of the superior ramus OFP. Standard screw insertion techniques are successful in most patients. If the osseous corridor or external anatomy impedes standard insertional techniques, several modifications exist that can allow successful screw insertion. A thorough understanding of each patient's anatomy, injury, and precise surgical technique with the appropriate fluoroscopic views are required to safely place intraosseous intramedullary implants into the superior ramus OFP.

Useful Intraoperative Technique for Percutaneous Stabilization of Bilateral Posterior Pelvic Ring Injuries.

Treating patients with bilateral posterior pelvic ring injuries can be challenging. Placement of transiliac-transsacral style screws in available S1 or S2 osseous fixation pathways is becoming an increasingly common fixation method for these unstable injuries. We propose a percutaneous technique that sequences reduction and stabilization of 1 hemipelvis with at least 1 transiliac-transsacral screw and then uses the existing transiliac-transsacral screw and accompanying guide wires to assist in temporary stabilization and definitive fixation of the second hemipelvis.

Is S3 a Viable Osseous Fixation Pathway?

OBJECTIVES: To report the incidence of patients with a third sacral segment (S3) osseous fixation pathway (OFP) that could accommodate a transiliac-transsacral screw. DESIGN: Retrospective case series. SETTING: Regional Level 1 Trauma Center. PATIENTS/PARTICIPANTS: A total of 250 patients without pelvic trauma from January 2017 to February 2017 were included. INTERVENTION: The axial and sagittal reconstruction images of each patient's computed abdomen and pelvis tomography (CT) scans were reviewed. MAIN OUTCOME MEASUREMENTS: Each CT was evaluated for the presence of sacral dysmorphism and whether an S3 OFP that could accommodate an intraosseous transiliac-transsacral screw exists. RESULTS: There were 130 of the 250 patients (52%) with sacral dysmorphism. Overall, 38 of the 250 patients (15.2%) had an S3 OFP that could accommodate a 7.0-mm transiliac-transsacral style screw. When narrowed to patients who had an S3 OFP, 38 of 153 patients (24.8%) could accommodate a 7.0-mm transiliac-transsacral screw. Specific to the 38 patients with an adequate S3 OFP, 34 of 38 patients (89.5%) were noted to have sacral dysmorphism. CONCLUSIONS: Our study demonstrates that 15.2% of patients have an S3 OFP large enough to accommodate an intraosseous implant. Patients who have sacral dysmorphism are more likely to have an adequate S3 OFP. Additional studies are needed to quantify the S3 OFP, understand the bone quality of the S3 segment and accompanying biomechanical implications, and investigate the anatomical concerns associated with S3 screw placement. LEVEL OF EVIDENCE: Prognostic Level III. See Instructions for Authors for a complete description of levels of evidence.

The Retrograde-Antegrade-Retrograde Technique for Successful Placement of a Retrograde Superior Ramus Screw.

Stabilization of pelvic ring injuries and certain acetabular fractures using percutaneous techniques is becoming increasingly more common. Intramedullary superior ramus screw fixation is beneficial in both injury types. While implants can be placed in an antegrade or retrograde direction, parasymphyseal ramus fractures benefit from retrograde implant insertion. In some patients, the parabolic osseous anatomy or obstructing soft tissues of the anterior pelvis or thigh can prevent appropriate hand and instrumentation positioning for appropriate retrograde ramus screw insertion through the entire osseous fixation pathway. Instead of abandoning medullary fixation, we propose a technique utilizing cannulated screws to successfully place retrograde screws in this distinct clinical scenario.

Lateral sacral imaging in the morbidly obese.

Obesity can complicate surgical procedures by both adding to difficulty intraoperatively and increasing postoperative complications. Intraoperative imaging can be difficult on morbidly obese patients. We have noted specifically that in morbidly obese patients where the lateral sacrum cannot be visualized on the pre-operative scout computed tomography image, the lateral sacrum will not be able to be seen on intraoperative fluoroscopy. This is an important component of preoperative planning in morbidly obese patients with pelvic ring injuries.